



Contact
MotoEquip

|
Our Helmet Reflective kits use 3M Scotchlite™ Reflective
Vinyl Tape exclusively. Each kit comes on a sheet you can cut into
four 10-inch strips. With 40 inches of reflective material, you can
get very creative with the designs. Do a simple wrap-around or come
up with your own ideas (some ideas shown in the photos below). It's
up to you.
The kits are easy to apply. Clean the helmet. Cut the
strips to the length required by your design, peel the bottom tape, press
firmly onto the helmet, and peel off the top tape. Please remember
to put the reflective material where you think it will do the most good.
|
Kit RK-22
1.5" tall Checkered Flag reflective kit. Available in
Black or Silver reflective tape. |
|
Kit RK-24
1.5" tall Speed Diamonds reflective kit. Available in
Black or Silver reflective tape. |
|
Kit RK-99
Two 8" x 11" sheets of 3M Scotchlite Black Reflective
Vinyl Tape for the Do-It-Yourselfer. 176 square inches. Enough tape to
creatively illuminate the rear of your bike, or your helmet, or a little
of both. |
|